Description
Intoacril 2002 acrylic sealant white granular structure - NPT 0006034
Water-based acrylic sealant for stucco applications, with granular structure.
High-quality single-component acrylic dispersion sealant.
After application, the product forms a soft elastoplastic rubber by evaporation of water from the sealant.
Certified and tested according to:
- EN 15651 - 1: Type F - INT
- HEMICODE EC 1 PLUS
Fields of application
Specially developed for filling and sealing cracks, on stucco, plaster and other substrates such as plywood, chipboard, cardboard (hard or soft), wood, concrete and stone.
Can be applied for any finish with dry brush or trowel.
Features
- Granular structure
- Does not drip
- Paintable in a short time with water-based or synthetic paints
- Low odor
- Easy to apply and clean, excellent workability
- Adheres without primer to most substrates, even slightly damp ones
- Non-corrosive to metals
Technical characteristics
| Color | White |
| Specific gravity [g/cm3 ] | Ca. 1.69 |
| Casting resistance [mm] (ISO 7390) | < 3 |
| SHORE Hardness A (DIN 53505) | ca. 25 |
| Dust out [min] (23°C, 50% R.H.) | ca. 25 |
| Curing speed [mm/24h] (NPT Method 07) (23°C, 50% R.H.) | ca. 2 |
| Volume change [%] | < 25 |
| Total allowable strain [%] (ASTM C920) | Ca. 15 |
| Temperature at application [°C] | 5 ÷ 40 |
| Thermal resistance [°C] | -25 ÷ 80 |
Application
Surfaces must be clean, free of crumbly parts, ice; possibly moisten surfaces, especially very porous ones (e.g., drywall) to prevent too rapid curing from causing cracking and/or detachment.
Within 20' of application, smooth thoroughly (with water) to ensure effective contact with surfaces.
Not suitable for direct contact with water.
Equipment cleaning and personal protection
Clean the tools used with water.
Once cured, the product can only be removed mechanically.
Product storage
Intoacril 2002 can be stored for 18 in unopened containers.
Keep away from sources of moisture, heat sources and direct contact of sunlight.
Protect from frost.